Solana Staking Guide (2026): Native Staking vs JitoSOL, mSOL & bSOL
Disclosure: This guide is information and opinion, not financial advice. Staking yields, MEV tips, and validator commissions change constantly on-chain. See our full disclaimer.
If you hold SOL and it’s just sitting in your wallet, you’re giving up yield for no reason. Solana pays staking rewards from its inflation, so un-staked SOL slowly loses ground against everyone who is staking. The fix takes a few clicks.
The catch in 2026 is that “staking SOL” now means several different things, and the gap between them matters. You can stake natively for maximum safety, or convert to a liquid staking token for higher yield and the ability to use your staked SOL in DeFi. Here’s how each one works, what it really pays, and where the risk hides.
Safest: native staking in Phantom or Backpack, roughly 6.5% to 7%, with no smart-contract exposure.
Most decentralized: mSOL from Marinade, which spreads your stake across many independent validators.
There’s no single right answer, it depends on whether you value yield, safety, or liquidity most.
Native staking vs liquid staking: the real difference
Everything downstream depends on understanding these two models, so start here.
Native staking means you delegate SOL directly to a validator, usually straight from your wallet. Your SOL sits in a stake account earning roughly 6.5% to 7% a year. The downside: to get it back, you wait out an unstaking cooldown of about one epoch, which is two to three days, and during that time it earns nothing and can’t be moved.
Liquid staking means you deposit SOL into a protocol that mints you a receipt token, like JitoSOL or mSOL. That token represents your staked SOL plus accruing rewards, and crucially, you can trade or sell it instantly on a DEX, no cooldown. You can also lend it or use it as collateral, so the same SOL earns staking rewards and does a second job. The price of that convenience is smart-contract risk, covered below.
The options compared
| Option | Rough APY | MEV boost | Unstaking | Use in DeFi |
|---|---|---|---|---|
| Native staking | 6.5% to 7% | No | 2 to 3 days | No |
| JitoSOL (Jito) | 7.5% to 8% ✓ | Full MEV tips ✓ | Instant swap ✓ | Deep liquidity ✓ |
| mSOL (Marinade) | 7% to 7.5% | Partial | Instant swap ✓ | Widely accepted ✓ |
| bSOL (BlazeStake) | 7% to 7.6% | Partial | Instant swap ✓ | Kamino, Marginfi |
Those yields move with network activity, so treat them as a current snapshot, not a promise. Check the live rate on each protocol before you commit.
JitoSOL and the MEV edge
Jito is the largest liquid staking protocol on Solana, with billions in deposits. The reason it pays more than plain staking is MEV.
MEV (Maximal Extractable Value) is the profit arbitrage bots and liquidators make by paying validators a tip to order their transactions favourably. Jito’s validator software collects those tips and passes them to JitoSOL holders, which adds roughly 1% to 1.5% on top of the base staking yield. That’s the whole reason JitoSOL sits at the top of the APY table.
How to stake natively in Phantom
If you want zero smart-contract exposure, where your SOL never touches a DeFi protocol, native staking is the path. In Phantom (Backpack is near-identical):
- Tap your SOL balance, then “Start earning SOL”.
- Pick a validator with high uptime and low commission (aim for 0% to 5%).
- Confirm the stake. Rewards start the next epoch.
That’s it. Your SOL stays in a stake account you control, and you’re earning within a day or two.
Where it can go wrong
De-peg risk. In a sharp sell-off or a liquidation cascade, an LST can briefly trade a percent or two below spot SOL on DEXs before arbitrage closes the gap. If you’re forced to sell into that, you take the discount. This is the specific danger that wrecks over-leveraged LST loops.
Validator commission creep. Some native validators launch at 0% commission to attract stake, then quietly raise it to 10% later, silently eating your yield. Check your validator’s commission now and then on a tracker like Solana Beach or Stakewiz.
The honest trade-offs
What’s genuinely good
- JitoSOL’s MEV tips push yield toward 8% with no extra effort
- Liquid tokens skip the 2-to-3-day unstaking wait
- LSTs can be lent or used as collateral for a second layer of yield
- Native staking has zero smart-contract risk
- No minimum: you can stake a fraction of a SOL
The catches
- Native unstaking locks your SOL for an epoch
- LSTs carry smart-contract and de-peg risk
- A high-commission validator quietly shrinks your return
- Stacking LSTs with leverage turns a small de-peg into a liquidation
- Rewards are taxable income in many countries
So which should you pick?
Whichever you choose, secure the wallet first. For a long-term SOL position, pair native staking with an air-gapped hardware wallet. If you’re going the liquid route and swapping on a DEX, run through our DEX safety guide first. And if you want to see what you actually keep after inflation, our staking math guide does the real-yield subtraction. For the live SOL price, our Solana price page stays current.
FAQ
How much can I earn staking 100 SOL?
At roughly 7.5% APY through JitoSOL, 100 SOL earns about 7.5 SOL over a year, compounding each epoch. The dollar value depends entirely on SOL’s price, which swings a lot, so think of the return in SOL terms first and convert to dollars second. Native staking would yield a bit less, closer to 6.5 to 7 SOL a year, in exchange for lower risk.
Is liquid staking better than native staking on Solana?
Neither is simply better; they trade off differently. Liquid staking like JitoSOL pays more (MEV tips push it toward 8%) and stays liquid, so you can sell or use it in DeFi instantly. Native staking pays a little less but has zero smart-contract risk, which makes it the better fit for a long-term holding you’re not going to touch. Match the choice to whether you value yield or safety more.
What is JitoSOL MEV?
MEV is the profit that bots pay validators to prioritise their transactions. Jito’s validator software collects those tips and distributes them to JitoSOL holders, adding roughly 1% to 1.5% on top of normal staking rewards. It’s the reason JitoSOL out-yields plain staking without you doing anything extra.
How long does it take to unstake SOL?
Native unstaking takes about one Solana epoch, roughly two to three days, during which the SOL earns nothing and can’t be moved. Liquid staking tokens skip this entirely: you swap JitoSOL or mSOL back to SOL instantly on a DEX like Jupiter, though you pay the current market rate rather than waiting for a clean 1:1 redemption.
Can you lose SOL by staking it?
Native staking is low-risk because Solana does not currently enforce automatic slashing for validator downtime, so your principal is generally safe. The real risk sits with liquid staking: a smart-contract exploit in a protocol like Jito or Marinade could put the underlying SOL at risk, and an LST can briefly de-peg below spot SOL in a crash. Native staking avoids both.
Do I pay tax on Solana staking rewards?
In many countries, including the US and UK, staking rewards are treated as income and taxed at their fair market value when you receive them, with a separate capital-gains event when you later sell. Rules vary by jurisdiction and change, so check your local guidance or a tax professional rather than assuming. This is general information, not tax advice.
What’s the minimum SOL needed to stake?
There’s effectively no minimum. You can stake a fraction of a SOL natively, or convert any amount to JitoSOL or mSOL on a DEX. That makes staking worth doing even for small holders, since the yield compounds regardless of size.
Should I split across native and liquid staking?
Many holders do, and it’s a sensible hedge. Keeping a long-term core staked natively (lowest risk) while putting a smaller, active portion into an LST like JitoSOL (highest yield and usable in DeFi) gives you both safety and flexibility, instead of betting everything on one model. Size each piece to your own risk tolerance.


